I have Zigbee stuff. Here’s what I like about that: they bridge between each other (if they’re powered rather than battery operated) and that extends the range. The range can be great to begin with! They’re not on my network, adding confusion or load on the access points, plus they can’t phone home… all local. Then there’s smart switches, and I’m going to point out that without WiFi they can’t be controlled, but Zigbee? Sure, I can easily power cycle my router and access points with Zigbee smart plugs! In fact I have an automation to do that daily. Finally, if something is WiFi you can’t know in advance if it’s cloud based or not, and regardless of that it’s a potentially unsafe device that is connected to the internet. Low power, but botnets work with numbers rather than power.

Agreed 100%, I’m happy with my 4th quarter 64gb Deck (after the ssd upgrade XD ), however choice and diversity is good. If Windows is considered a selling point, and a Linux version would have to be a separate SKU, reducing availability? Giving the option to buy the single Windows SKU, and maybe downloading an official tool that installs Linux with all the necessary drivers would be better than having to justify a separate, likely less popular SKU. Plus while neither of us is interested in the Ally, other people will have different tastes. Let companies make all shapes and performance/price options for everyone :D

I pointed out that the OS, trackpads and ergonomics are my main focus. Honestly, more Linux devices would be a win! Even if it ships with Windows but there’s an easy, official way to get Linux on the thing that’d be great.

I enjoy this 1.5 Lora https://civitai.com/models/165876/2d-pixel-toolkit-2d it’s pretty neat!

I have a Sovol SV07 Plus, that is the newer version of the SV06 Plus… or in other words, the mechanically identical, but larger, SV06. It’s easy to assemble, it’s bigger than the A1 Mini. Now, you don’t know how big your printer needs to be, until you find out that it’s too small! I found that the 22cm square offered by my old Ender 3 was enough for most things, but it wasn’t enough for everything. I also had a 12cm square with a Monoprice Select Mini Plus V2(the name was the biggest thing lol) and that was quick to become restrictive. Would I suggest the A1 Mini, that has halfway between the two? I don’t know. But at the same time it comes pre assembled (it might not be a concern for you) and easy to use. In short I would recommend the SV07 as that’s the small and less expensive version of what I have, but the SV06 should be mechanically identical so that gives me hope it’ll perform equally well. The downsides are a less than stellar control unit (the hardware inside the touchscreen), a weird as fuck cooling fan that is super loud, and instructions that trick you into believing that the packets of screws are numbered in a meaningful way. Don’t. That said it prints everything with ease, it’s really fast and that fan might be loud, but at the same time works wonders. I love it. Oh! Also. Once I ever so slightly fucked up the Z offset, making it scrape quite thoroughly the build surface: nothing got damaged, build surface included!

The absurd thing is that it even depends on the game. I’ve initially tried without any problems the crappy phone vr with… the iPhone 5s, I think? Then the first PS VR on a base PS4, and titles known to upset people like EVE Valkyrie and Drive Club had no effect on me. “Comfort settings” typically meant just blinding me without a reason. Then, 20 minutes of Arizona Sunshine… and I wasn’t able to stomach the thought of vr for almost a year.

Seconding this. I had a rock solid Ender 3 since 2018 that got a few upgrades (btt 32 bit silent board, geared extruder, abl, couple of printed add ons) but never really needed any maintenance, recently upgraded to a Sovol SV07 Plus (big SV07, mechanically similar to the SV06) and hot damn! It’s a beast. Not only it goes stupid fast, can reach higher temperatures, heats faster… but it’s great out of the box and it prints TPU like nothing. Really, I tested it without changing anything and it worked fine. Downsides are that I got used to Octoprint and it can’t be used here, but Klipper is a decent replacement. Now, the ugly bit about that: it’s running on a really cheap board and an oddly customized os. You don’t notice any of that normally so that’s a plus, HOWEVER if like me you have a Spaghetti Detective/Obico account things change. There’s some copy paste to do via ssh, then the webcam struggles to hit 15 fps and whatever you do DON’T push any update button! Those wrecked everything. Not a fun few hours when I tried to figure out how to fix it.

Anyway the SV06 mentioned by OP is with Marlin rather than Klipper so none of the warnings apply :D

I’m guessing there’s a mix. The smallest version is 700 million, possibly the one used to generate the time data reported, but the largest (or not?) still runs with 8gb. If I remember correctly SD3 is supposed to have multiple versions, starting from 800 millions and going up, so this is going to be interesting.

I’ve never had issues with Cura losing my stuff (been using it with an Ender 3 since… 2019 I think) but the backup plugin is connected with your account. It’s a wonderful thing! New computer? Login, restore backup, everything is like you left it.

I do make sure to use it before any update because I have seen the same kind of posts as you have.

Cool, looks simple enough. Can’t test it on my phone, but for things with the A12 and up (although ram can and will be a problem if less than 6gb) there’s https://apps.apple.com/it/app/draw-things-ai-generation/id6444050820?l=en-GB

Can I offer what I believe is a better option? 1.5 LCM models. 5 steps for a good image, and they’re 5 steps at 1.5 speeds :)

I like this but obviously you can find other LCM models.

How old of a Xeon? Because it won’t be a fast result, but maybe you are fine with it. Back when I tried this, SD 1.5 could do 20 steps at 512x512 on my Ryzen 5 3600 in roughly 7 minutes…

Same one I use, also made an enclosure to 3D print and protect it from rain. It’s been going on without issues since 2020 https://www.printables.com/model/169425-xiaomi-aquara-thermometer-outdoor-case